Subscribe to Our Youtube Channel
Related Manuals for Franklin & Ben 7616
Summary of Contents for Franklin & Ben 7616
- Page 1 Item#7616 Classic 7-Drawer Double Wide Dresser Assembly Instructions Commode double à 7 tiroirs Classic Manuel d’assemblage revised 03MAY2019...
- Page 2 Thank you for purchasing a Franklin and Ben nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.franklinandben.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle B. Front Feet (2) B. Pieds avant (2) C. Rear Feet (2) C. Pieds arrière (2) A. Dresser Body D. Middle support A. Cadre de la commode D. Support central HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1.
- Page 4 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE B / C...
-
Page 5: Phillips Screwdriver
(REQUIRED) (OBLIGATOIRE) WARNING AVERTISSEMENT Serious or fatal crushing injuries Le basculement du meuble peut entraîner des blessures graves ou can occur from furniture tip-over. fatales par écrasement. Pour aider To help prevent tip-over: à prévenir le basculement : Install tipover restraint provided. Installer le dispositif Place heaviest items in the lowest antibasculement fourni. - Page 6 Attach bracket to the wall with the 1-1/2" wood screws provided: Wall Stud Wallboard It is recommended that you locate a wall stud Montant Panneau du mur behind the furniture unit. If the wall stud is not used, a suitable "Hollow-Wall Anchor Bolt" (not provided) should be used in lieu of the wall Bracket stud.
-
Page 7: Please Read
Wallboard Furniture Top To Attach the safety straps: Dessus du meuble Panneau du mur Move the furniture back to its final position. Thread 2 safety straps through both of the mounted brackets as shown in the illustration. Tighten the straps. Do not over tighten. - Page 8 Finish Terminé READ ALL INSTRUCTIONS BEFORE CHANGER TRAY IS NOT INCLUDED, USING THE PRODUCT. KEEP THE SOLD SEPARATELY. CHANGER TRAY INSTRUCTIONS FOR FUTURE USE. M0219 OR M0619 IS RECOMMENDED. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. LA TABLE À...
-
Page 9: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. - Page 10 Registering your product is even easier than before. You can register your product on our website at : www.franklinandben.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: www.franklinandben.com/parts OR YOU CAN CONTACT US BY MAIL: FRANKLIN AND BEN 8700 REX RD., PICO RIVERA, CA 90660 (323) 736-2693...
Need help?
Do you have a question about the 7616 and is the answer not in the manual?
Questions and answers