Operation; Making A Temporary Control Link With The Xmt-350 - Acclaim Lighting Dyna Accent User Manual

OPERATION

Dyna Accent fixtures have no external controls and instead rely on RDM (Remote Device
Management) for all configuration via the DMX interface. This allows multiple devices to be
configured either before or after installation.
The main items that can be configured on each fixture (via RDM) are:
• DMX address
• Aria™ wireless receiver
• Automation features
Various third party DMX/RDM tools are available; we recommend the Acclaim Lighting XMT-
350 for this task.

MAKING A TEMPORARY CONTROL LINK WITH THE XMT-350

Each Acclaim lighting XMT-350 DMX/RDM tool is supplied with a 5-pin male XLR lead that
can be used to make a temporary control input link with the Dyna Accent feed-in cable. Use
a 3-pin terminal block, wire nuts, conn blocks or Wago® connectors to temporarily join the
two cables:
Dyna Accent
feed-in
cable
12
(see page 13)
(see page 14)
(see page 15)
Red
Gray
Black
Power in
DMX + (Hot)
DMX – (Cold)
Ground
www.acclaimlighting.com
Red
Gray
Black
Male XLR
lead from
XMT-350