E) Program Overview - BASETech 1517164 Operating Instructions Manual

3 Now you can set the program parameters for the selected day. The program setting starts at
0:00 every day.
4 Press the "TEMP" button to set one of the following five functions:
- Comfort
- Semi-Comfort one point is shown
- Economic
- Anti-Frozen
- Off
5 Press the buttons " " and " " to select the individual hours.
The setting is maintained until you change it by pressing the
"TEMP" button.
6 Press the "PROG" button to exit your program settings. Then
you can set the remaining days as described in steps 3 to 5.
7 When you choose to have the same program on two days, you
can use the "COPY" function which easily copies programs.
Press the "COPY" button at the start of the program configura-
tion for the day. The display shows the "COPY" icon. To confirm
the copy function, press the "OK" button.
• Repeat steps 1 - 7 to configure the remaining days.
• Once everything is configured, press the "OK" button to confirm your selection.

e) Program overview

With the program overview, you can recall and check programs already configured.
1 Press and hold the "PROG" button to enter the program set-
tings menu. Press the "SELECT" button 4 times until "7AY" is
shown on the display.
34
two points are shown
no point; moon is shown on the display
no point; snowflake is shown on the display
no point; Off is shown on the display