Table of Contents
Advertisement
Bluetooth®
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are paired and
connected.
Notes:
• If no connection can be established, the
y shows "CONNECT FAILED".
• If a Bluetooth® device is connected with
the car sound system, the display shows
the Bluetooth® icon .
• After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
DEVICE". If necessary, attempt to re-estab-
lish the connection from the Bluetooth®
device.
Twin connect
If you want to connect two Bluetooth® devices
with the car sound system at the same time, Twin
Connect needs to be activated in the Bluetooth®
menu (see the chapter "Additional functions in the
Bluetooth® menu", section "Activating/deactivat-
ing Twin Connect").
If two cell phones are connected with the car
sound system, one of the connected phones must
be selected as master telephone (see the chapter
"Additional functions in the Bluetooth® menu",
section "Managing paired devices").
Upon activating Twin Connect, the currently con-
master telephone. If no telephone is connected
with the car sound system, the previously con-
phone. In the lift of telephones, an asterisk symbol
*
(
) is shown next to the Bluetooth® name of the
master telephone.
Notes:
• Only the master telephone is used for
outgoing calls.
• You can access only the phone book of the
master telephone.
• You can select the other connected tel-
ephone as master telephone at any time.
01_LONDON470 DAB BT_de.indd 1
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "INCOMING CALL" and the number of the
caller. The current audio source is muted and a
ring tone is played via the loudspeakers of the car
sound system.
y shows "NO
ed as
ed as master tele-
Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE NUM-
BER" instead of the number. If the number
of the caller is stored together with a name,
the name of the entry and the number are
displayed (see the section "Storing a phone
number in the car sound system" in this chap-
ter).
Press the
button
to answer the call.
=
"CALL" and the duration of the ongoing call
are displayed.
Press the
button to reject the call or
<
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control
microphone and the loudspeakers with a
• You can preset the minimum volume for
the call playback in the user menu (see the
chapter "User settings", section "Making set-
tings in the "VOLUME" menu", menu item
"HANDSFREE VOL").
• You can switch the call playback back and
forth between the loudspeakers of the car
sound system and the cell phone with the
button
.
=
• If another call is received during an ongo-
ing phone call, the second call cannot be
answered via the car sound system.
active ignition, it automatically switches
on with an incoming call. This allows you to
make the call over the hands-free system.
or mute the
4
button
.
3
with
20
31.05.17 15:58
Hide quick links:
Advertisement
Table of Contents
