Hotpoint C368E Instructions Manual page 16

Electronic Clock 6 Automatic Oven Timer
Operation
[c3s7E e c3seEJ
Note 1 When cooking automatically the Cook Period can be checked at any time by simply
pressing the Cook Period button.
Note 2 When cooking automatically the End Time can be checked at any time by simply
pressing the End Time button.
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET COOK
PERIOD
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Step 3 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven
function.
I . 3 0
I
1
step 4 Press
&
hold in the Cook Period button, the display will read 0.00 and the
'-r==="'"-_J·
'cookpot' symbol will light up and the 'Auto' symbol will flash.
O o
t
o o w W i t h the Cook Period button still held in set the required Cook Period using the
D D D D
"+"and"-" buttons. Example: 1 hr 30 minutes (as shown).
Note: Cook Period is the length of time the food requires to cook.
Step 5 Release all buttons.
,.._The timer display will revert to the time of day with the 'Auto' symbol lit &
'cookpot' symbol remaining lit.
NOTE: The
cookpot symbol disappears At
t~e
end of
t~e
Cook Period the 'Auto' symbol will flash and an intermittent
aud1ble tone w1ll be heard.
The audible tone will continue until cancelled. The 'Auto' symbol will continue to
flash until the timer is returned to Manual operation (see below).
l1s.rJ--r .....
Press the Manual button. The audible tone will be cancelled and the
oven(s) will be returned to Manual.
000000
Step 7 Turn the oven control(s) to the OFF position.
16