Adjusting Setup Items - Set; Using Optional Equipment; Cd/Md Changer - Sony CDX-F50M Operating Instructions Manual

Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold (LIST).
2 Press and hold (DSPL).
The stored name will flash.
3 Rotate the volume control dial repeatedly to
select the name you want to delete.
4 Press and hold the select button.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST).
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press VOL + or –.
Adjusting setup items
— SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ (page 4)
(Clock Adjust)
BEEP To set "ON" (
AUX-A* 1 To turn the AUX source display
"ON" (
SUB/REAR* 1 To switch the audio output.
– "SUB" (
subwoofer.
– "REAR": to output to a power
amplifier.
10
) or "OFF."
z
) or "OFF" (page 12).
z
): to output to a
z
DIM (Dimmer) To change the brightness of the
display.
– "AT" (
automatically when you turn
the lights on.
– "ON": to dim the display.
– "OFF": to deactivate the
dimmer.
DEMO*
1 To set "ON" (
(Demonstration)
M.DSPL
To select the Motion Display
(Motion mode.
Display) – "SA" (
patterns and spectrum
analyzer.
– "ON": to show moving
patterns.
– "OFF": to deactivate the
Motion Display.
CONTRAST
To adjust the contrast of the
display.
The contrast level is adjustable
in 7 steps.
A.SCRL To scroll long displayed items
(Auto Scroll) automatically when the group/
track is changed.
– "ON": to scroll.
– "OFF" (
LPF* 2 (Low To select the cut-off frequency
Pass Filter) "78HZ," "125HZ" or "OFF"
( ).
z
*1 When the unit is turned off.
*2 When the audio output is set to "SUB."

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number Disc number
Playback starts.
): to dim the display
z
) or "OFF."
z
): to show moving
z
): to not scroll.
z