Casio CDP-S350 User Manual page 53

USB Flash Drive
■ To load data from a USB flash drive to Digital
Piano memory
1.
Perform steps 1, 2, and 3 under
Digital Piano data to a USB flash
EN-51).
2.
Use the bo dial to display "Load", and then
press bp ENTER.
3.
Use the bo dial to display a sub-menu item of
options that correspond to the type of data
being imported.
• See "Sub Menu Item/File Name Extension
EN-51).
4.
Press bp ENTER.
This displays a file name of data that can be imported.
5.
Use the bo dial to select the data you want to
import into Digital Piano memory.
• If "All Data" is selected in step 3, steps 6 and 7 below
are not required. Proceed to step 8.
• Pressing 6 CATEGORY at this time will display the
file name extension of the currently selected data file.
(The FUNCTION indicator will flash as the file name
extension is displayed.) Press 6 CATEGORY again
to return to the file name.
6.
Press bp ENTER.
7.
Use the bo dial to specify the number of the
user area where imported data should be
stored.
8.
Press bp ENTER.
This displays "Sure?"
• If you displayed "All Data" in step 3 of this procedure or
if the user area you specified in step 7 already
contains data, the message "Replace?" will appear. If
this happens, pressing bp ENTER in step 9 below will
overwrite the existing data in the user area with the
imported data.
9.
Press bp ENTER to import.
• To cancel the operation, long-press bp ENTER.
• Pressing bp ENTER displays "Wait..." (operation in
progress). Do not perform any operation while this
message is displayed. "Complete" is displayed after
the operation is complete.
10.
To exit the operation, press bq TONE.
EN-52
■ To delete USB flash drive data
1.
"To save
drive" (page
2.
3.
List" (page
4.
5.
6.
7.
8.
Perform steps 1, 2, and 3 under
Digital Piano data to a USB flash
EN-51).
Use the bo dial to display "Delete", and then
press bp ENTER.
Use the bo dial to display a sub-menu item of
options that correspond to the type of data
being deleted.
• See "Sub Menu Item/File Name Extension
EN-51).
Press bp ENTER.
Use the bo dial to select the data to be deleted,
and then press bp ENTER.
• Pressing 6 CATEGORY at this time will display the
file name extension of the currently selected data file.
(The FUNCTION indicator will flash as the file name
extension is displayed.) Press 6 CATEGORY again
to return to the file name.
Press bp ENTER.
This displays "Sure?"
To delete the data, press bp ENTER.
• To cancel the operation, long-press bp ENTER.
• Pressing bp ENTER displays "Wait..." (operation in
progress). Do not perform any operation while this
message is displayed. "Complete" is displayed after
the operation is complete.
To exit the operation, press bq TONE.
"To save
drive" (page
List" (page