Related Manuals for Radiodetection RD5100 H2O
Summary of Contents for Radiodetection RD5100 H2O
- Page 1 RD5100 ™ Multifunction precision cable and pipe locator User Guide PART NO. 90/UG112INT/01...
-
Page 2: About This Guide
O locator operation manual, which is https://support.radiodetection.com available for download from: www.radiodetection.com From time to time Radiodetection may release new software to improve the performance or add new functionality to its products. By registering, users Certificates of conformity for the RD5100H O locator and transmitter can be found at: www.radiodetection.com... - Page 3 16. Signal strength: Bargraph with peak NiMh batteries by purchasing the marker. optional battery compartment from 17. Depth: Indication of depth reading. Radiodetection. 18. Current: Indication of signal current Li-Ion battery charger socket. reading. Accessory socket. 19. Compass: Displays the direction Headphone jack.
-
Page 4: Transmitter Front Panel
When the Lithium Ion low battery level LED illuminates the user should either recharge the battery pack using the Radiodetection supplied charger or alternatively fit 4 alkaline batteries. If alkaline batteries are fitted to the transmitter, these will be detected automatically and the transmitter will take its power from the alkaline batteries. -
Page 5: Before You Begin
Keypad actions and shortcuts calibration, press and hold the key when switching the locator on. This information may be asked for when contacting Radiodetection or your local representative for technical support. Switch the locator or transmitter on by pressing the key. - Page 6 Locating pipes and cables Transmitter Clamp An optional signal clamp can be placed around an insulated live wire or pipe up to For more detailed descriptions of using the locator and transmitter, and for detailed 215mm (8.5") in diameter to transfer the transmitter signal to the utility. This method locate techniques, refer to the Operation Manual.
-
Page 7: Using Accessories
Using accessories Getting started with the RD5100H The transmitter is compatible with a range of accessories. For detailed information on To power on or power off the locator and transmitter, press and hold the On/Off using any of the accessories below please refer to the RD5100H O locator operation key for 2 seconds. - Page 8 Locating the Pipe or cable Figure 2 Figure 2 shows the locator in Guidance Mode and directly over the target line. In Having chosen the method of applying the transmitter signal to the pipe or cable, the this position the left and right arrow heads locator is now ready to use.
-
Page 9: Care And Maintenance
However, as with all safety equipment, it is recommended that they are Do not use this equipment when damaged or faulty. serviced and calibrated at least once a year either at Radiodetection or an approved repair center. Batteries and power supply NOTE: Service by non-approved service centers may void the manufacturer’s... - Page 10 RD5100H O are either trademarks of Radiodetection in the United States and/or other countries. Due to a policy of continued development, we reserve the right to alter or amend any published specification without notice. This document may not be copied, reproduced, transmitted, modified or used, in whole or in part, without the prior written consent of Radiodetection Ltd.