Sony CDX-C610RDS Operating Instructions Manual page 17

Notes
• "*WAIT*" appears in the display while the unit is
reading the data, or when a disc has not been put into the
unit.
• "*FULL*" appears in the display when you try to enter
more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired program appears.
z PGM-1 z PGM-2
PGM-OFF Z
Progarmme Play starts.
To go back to the normal playback mode,
select "PGM-OFF" in step 3 above.
Notes
• If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
• "NO DATA" appears in the display if no track is stored
in the programme.
• If a track stored into the programme memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information tracks has not been loaded yet,
"NO READY" appears.
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
CD2
DISC TRACK
SUR 4 7 P108
EQ
PLAY MODE ENTER
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
Actual total number:
2
Press (1) (N) repeatedly until "DEL"
appears.
DEL
SUR
EQ
To erase Programme 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
P1
SUR
EQ
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
Adding tracks to the programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
z PGM-1+2
CD2
SUR
EQ
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
CD2
SUR
EQ
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*FULL*" appears
in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
Sony CDX-C610RDS (
- - P G M 1 - -
PLAY MODE ENTER
N O D A T A
PLAY MODE ENTER
DISC TRACK
4 7 P 1 0 8
PLAY MODE ENTER
Track slot number
DISC TRACK
3 2 P 1 0 5
PLAY MODE ENTER
E
,F,G,I) 3-856-122-12(2)
EN
17