Honda Amaze 2018 Owner's Manual page 286

uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
Getting Ready to Replace the Flat Tyre
The tyre to be replaced.
284
1. Open the boot floor lid.
Floor Lid
2. Take the jack, jack handle bar and wheel
nut wrench out of the tool bag.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tyre.
Tool Bag
4. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tyre.
Wheel
Blocks
1Changing a Flat Tyre
WARNING: The jack can only be used for helping an
emergency vehicle breakdown, not for changing the
regular seasonal tyre or any other normal
maintenance or repair operation.
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.
1Getting Ready to Replace the Flat Tyre
Be careful not to hurt yourself when removing or
storing the spare tyre.