Honda Amaze 2018 Owner's Manual page 264

Table of Contents

Advertisement

uuReplacing Light BulbsuBrake Light, Taillight, Back-Up Light and Rear Turn Signal Light Bulbs
Brake Light, Taillight, Back-Up Light and Rear Turn
Signal Light Bulbs
When replacing, use the following bulbs.
Brake Light: 21 W
Taillight: 5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
Holding Clip
Bulb
Socket
262
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.
1Brake Light, Taillight, Back-Up Light and Rear Turn Signal Light
Bulbs
Holding clip
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Central Pin
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents