Page 1
Thank you for purchasing the iPazzPort iPazzCast Media Streaming Player with brand new technology used for different devices. Please e-mail us for supports to make best of the iPazzCast at support@ipazzport.com. and All inquires will be answered within two business days.
Page 2
1.Introduction *Unisen iPazzPort Cast is a mini device to turn your Home HDMI Screen become a multi-function Media Sharing monitor from your Smart phone or tablet etc. *The iPazzPort Cast is so elegant and portable enough to come with you on trip or anywhere...
Page 3
VGA Port Audio out Mini USB-Power HDMI Port Free switch mode between DLNA and M iracast by a Long press on the restart...
2.iPazzPort cast iPazzPort cast Table PC Smart phone...
Page 5
2.plug the other end into the micro port on the device (.A blue indicator next to the mini USB socket will be steady on. 3.Then connect the HDMI / VGA socket from TV/projector with the iPazzPort Cast 4.Power on TV screen or Projector, look for the“source”, that you plugged...
Please connect your cell phone or computer with this miracast fro meeting or training demonstration according to the following steps. 1.Android phone Turn on your phone,tap “settings” -->> Touch“Screen Mirroring” -->> Open“Screen Mirroring” -->> connect“iPazzPort-XXXXXX” -->> connect it successful iPazzPort-AF1EB8 iPazzPort-AF1EB8 Android screen...
Page 7
--> click the icon “iPazzPort- XXXXXX” -->> connected successful Computer screen Computer iPazzPort_Cast_33D808 screen iPazzPort_Cast_33D808 3.iPhone Go to settings,WiFi connected “iPazzPort-XXXXXX” -->> Turn on your iPhone, Open the taskbar -->> Click AirPlay icon -->> Choose“iPazzPort- XXXXXX ”, turn on“Mirroring”,click “Done”...
Status: 192.168.49.1 Local IPO: Open Wi-Fi and connect AP SSID: 'iPazzPort-AF1EB8' (password: 12345678)or'12345678'. Local IP1: And then open web browser on your device and visit: http://192.168.49.1/index.html when conneted to 'iPazzPort-AF1EB8' iPazzPort-AF1EB8 iPazzPort-AF1EB8 iPhone screen iPazzPort-AF1EB8 5.3.Connected 5.1.Go to settings,displays 5.2.Enter password Successfully “12345678”Press...
Page 9
192.168.49.1 Local IPO: Open Wi-Fi and connect AP SSID: 'iPazzPort-AF1EB8' (password: 12345678)or'12345678'. Local IP1: And then open web browser on your device and visit: http://192.168.49.1/index.html when conneted to 'iPazzPort-AF1EB8' iPhone screen 5.9.Connected 5.8.Input password 5.7.Choose the WiFi router Successfully ---Click connect...
Page 10
Local IPO : Open Wi-Fi and connect AP SSID : 'iPazzPort-AF1EB8' (password: 12345678)or'12345678'. Local IP1 : And then open web browser on your device and visit: http://192.168.49.1/index.html when conneted to 'iPazzPort-AF1EB8' iPazzPort-AF1EB8 iPhone screen 6.1 .Enter Photos, 6.3.Choose “iPazzPort-XXXXXX”. 6.2.Choose AirPlay icon.
Page 11
The iPazzPort cast screen iPhone screen 6.4.success...
.1.3 Run “WiFi Analyzer” to make sure the Wi-Fi Router signal strength is more than -60dB. Following the picture below ,please move the Wi-Fi router or iPazzPort Cast receive a better result if you get a weak signal. .2.Test the receiving signal strength of iPazzPort Cast.
Page 13
.4 Run “WiFi Analyzer”to confirm the receiving signal strength is -60dB or above, as the picture below shows . .5 If the signal is low, please move “iPazzPort Cast” or connect to HD extended cable. Please make sure there is no other unwanted signal interference.
Need help?
Do you have a question about the NC-812-16HV and is the answer not in the manual?
Questions and answers