Advertisement
Setting the Switches:
Switches are set by sliding them up or down. To turn a switch "ON"
slide it to the up position. To turn a switch "OFF" slide it to the
downward position.
Switches 1 and 4 control the repetition rate. This controls how
often the transmitter bursts signal. Transmitter repetition rate can
be set at ½, 1, 2 and 4 second intervals. The slower the repetition
rate (i.e. 4 seconds) the greater the transmitter battery life.
Settings:
1 ON, 4 ON
1 OFF, 4 ON
1 ON, 4 OFF
1 OFF, 4 OFF
** Will result in poor battery life. Only use for initial training.
Transition to a slower repetition rate when proper behavior has
been obtained.
½ second
**
1 second
2 seconds
4 seconds
7 |
P a g e
Advertisement
