Locating A Specific Track - Sony CDP-XA555ES Operating Instructions Manual

Playing CDs
Display information while playing a disc
While playing a disc, the display shows the current
track number, index number, playing time, and the
music calendar.
Current track
number
Index number (page 11) or Custom Index
number (page 20)
The track numbers in the music calendar disappear
after they are played.
Checking the remaining time
Each time you press TIME while playing a disc, the
display changes as shown in the chart below.
Playing time
and number
of the current
track
Remaining
time on the
current
track
Remaining
time on the
disc
If the remaining time exceeds 100 minutes in programme
mode, "– – . – –" appears instead of the remaining time.
Turning off the music calendar in the
display
Each time you press DISPLAY MODE on the remote
while playing a disc, the music calendar turns off and
on alternately in the display.
GB
10
1 2 3 4
INDEX MIN SEC
6 7 8 9 10
Playing time Music calendar
1 2
INDEX MIN SEC
6 7
Press
1 2
INDEX MIN SEC
6 7
Press
1 2
MIN SEC
6 7
Press

Locating a Specific Track

You can quickly locate any track while playing a disc
using the AMS (Automatic Music Sensor) on the player
or the number buttons on the remote.
5
Number
buttons
>10
3 4 5
8 9 10
=/+
3 4 5
8 9 10
3 4 5
8 9 10
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly Z
When you directly locate a track numbered over 10
Z
Press >10 first, then the corresponding number buttons
on the remote. To enter "0," use button 10/0.
Example: To play track number 30
You need to
Turn ≠ AMS ± clockwise until
you find the track. When using the
remote, press + repeatedly until you
find the track.
Turn ≠ AMS ± anticlockwise
until you find the track. When using
the remote, press = repeatedly until
you find the track.
Press the number button of the track
on the remote.
Press >10 first, then 3 and 10/0.
≠ AMS ±