Dynabrade 10685 Machine Parts & Operating Instructions

Filter-Regulator-Lubricator
1/2" NPT Inlet /Outlet Ports
Machine Parts & Operating Instructions – Save This Document and Educate All Personnel
WARNING
To reduce risk of
injury, everyone using,
installing, repairing,
maintaining, changing
accessories on, a
working near this tool MUST read
and understand these instructions
before performing any such task.
DO NOT DISCARD – GIVE TO USER.
FILTER
3
1
2
4
Index Key
Item Part No.
1 10645 Filter Element (5 Micron)
2 10684
3 10692
4 10693 Bowl Assembly
5 10640 Valve Assembly
6 10641 Diaphragm Assembly
7 10642 Valve Guide Assembly
8 10698 Lubrication Plug Assembly
9 10658 Damper Retainer Assembly
10 10668 Bowl Assembly
11 10659 Damper Assembly
12 10656 Slight Dome Assembly
13 10665 Mounting Bracket (2)
14 10667
— 10697 Dual Pressure Guage (Not Shown)
Always follow the safety instructions provided in this manual. They are intended to prevent a hazardous situation
and / or equipment damage. Refer to Dynabrade's Pneumatic tool safety & operating guidelines. For additional
safety, be sure to observe ISO 4414 - General rules and safety requirements for systems and their components.
Model No.
10685
10694
10687
10688
10689
10690
REGULATOR
13
14
5
6
Description
Baffle
Bowl O-Ring
Seal
Description
Filter
Regulator
Lubricator
Filter-Regulator
Regulator-Lubricator
Filter-Regulator-Lubricator
7
Inlet/Outlet Max.
Port Air Pressure
150 PSIG
1/2" NPT
(10.3 Bars)
3/8" Reducer Bushings
The enclosed bushings (2) are supplied to
reduce the 1/2" NPT openings of the enclosed
Filter-Regulator-Lubricator to 3/8" NPT.
(Use only if required)
LUBRICATOR
12
8
11
9
3
10
Max. Max. Air
Air Flow Temperature
106 SCFM 150˚ F
(3,000 LPM) (65˚ C)
IMPORTANT
Do Not Overtighten
the Bushings!
The bushings will not
engage entirely into
the 1/2" NPT opening
after tightening.
Refer to recommended
tightening torque chart
.475"
on page 6.
(12 mm)
PD16.19
July, 2016