Ⅳ、Wired Connection - coov N100 Plus Instruction Manual

Pro Joypad to connect to Bluetooth pairing:
1. The NS Pro Joypad is in the normal Bluetooth connection state.
2, enter the Switch host "System Settings" - "Controllers and Sensors" - "Disconnect
Controllers".
3. Press and hold the"Sync Button "，on the top of the Joypad until the Joypad indicator
flashes cyclically. (Search for Bluetooth)
4. Connect the N100 Plus to the Switch host according to the diagram. Press the pairing
button and the indicator light flashes double (Search for Bluetooth).
5, wait 3-5 seconds or so, the first light of the Joypad indicator light is always on, the game
display shows that the Joypad is connected successfully and a "USB" prompt appears,
the connection is successful.
Ⅳ、Wired Connection
The N100 Plus is wired to the Switch host and Joypad, plug and play. (Only used in
wireless B mode)