Asus H81M-V PLUS Manual page 27

11. System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
H81M-V PLUS System panel connector
• System power LED (2-pin +PWR_LED-)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDD_LED-)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
12. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
H81M-V PLUS Digital audio connector
ASUS H81M-V PLUS
E9408_H81M-V_PLUS_Guide.indb 19
F_PANEL
+PWR LED
PIN 1
H81M-V PLUS
+HDD_LED-
H81M-V PLUS
SPDIF_OUT
PWR_BTN
RESET
1-19
2015/1/19 15:51:00