Asus H81M-V PLUS Manual page 16

•
•
•
1.4.3 Installing a DIMM
1
2
3
1-8
E9408_H81M-V_PLUS_Guide.indb 8
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory
frequency adjustment.
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
Visit the ASUS website at: www.asus.com for the latest QVL.
Chapter 1: Product introduction
2015/1/19 15:50:55