Toto CST474CEFG Installation Manual page 5

1.
outlet on underside of tank.
2.
3.
inlet in bowl tank shelf.
4. Place washers on mounting bolts. Support tank and align mounting bolts
through ½" holes in tank base and bowl mount shelf.
Thread on nuts end, hand tighten before releasing the tank.
Tighten nuts evenly until tank sets snug on bowl.
NOTE: Do not grab the
the tank.
1.
sure that the spigot outlet of toilet slips into rubber sleeve and T-bolts
2. Insert washer and thread nuts on to bolts and hand tighten.
3. Tighten bolts an additional ½ turn.
4. Install cover plates.
INSTALLATION PROCEDURE
Tank to Bowl Mounting
Installing Toilet
nut
washer
Cover
Plate
WARNING: DO NOT over tighten the nuts, damage to
china or plastic parts may result.
Rubber Washer
Brass Washer Brass Nut
spigot outlet
5
Tank-to-Bowl Gasket
Tank
Bowl
rubber
sleeve