Siemens SIMATIC S7 System Manual page 4

Preface
What's New?
The following table summarizes the most important technical changes in the add-on
packages
changes have been taken into account in this system description.
Support for PROFINET IO with:
•
•
•
•
•
•
Safety-related CPU-CPU communication has been expanded to
include I-slave-slave communication
Channel-specific passivation when channel errors occur:
•
•
•
•
New F-library blocks
Safety Data Write
ET 200pro fail-safe modules
Fail-safe I/O standard devices
iv
S7 Distributed Safety V 5.4
Technical Change
CPU 416F-2 (6ES7 416-2FK04-0AB0) as of firmware
version V 4.1 with CP 443-1 Advanced
CPU 315F-2 PN/DP
CPU 317F-2 PN/DP
ET 200S fail-safe modules
ET 200pro fail-safe modules
Fail-safe I/O standard devices
S7-300 fail-safe signal modules
ET 200S fail-safe modules
ET 200pro fail-safe modules
ET 200eco fail-safe I/O module
S7 F Systems V5.2 SP2
and
System Manual, 04/2006, A5E00109529-05
and higher. These
Change Affects:
S7 Distributed S7 F/FH
Safety Systems
x
x
x
-
-
x
x
Safety Engineering in SIMATIC S7
-
-
-
x
x
-
-