Sony HVR-M15E Operating Instructions Manual page 39

To video equipment without an i.LINK jack
When connecting the unit to a recorder without an
i.LINK jack, connect the two devices as shown below.
Set [COMPONENT] and [DOWN CONVERT]
setting of [VIDEO OUT] in [IN/OUT REC] menu
(page 47) corresponded to the signals you wish to
output.
Recorder
Notes
• Refer also to the Notes on page 25.
• The audio output signal is selected by the setting of
[AUDIO MIX] in [AUDIO SET] menu.
Monitor
Audio input
Video input
S-video input
Component video input
Audio cable (Phono jack) (not supplied)
Video cable (not supplied)
S-video cable (not supplied)
Component video cable (not supplied)
HVR-M15 (rear panel)
: Signal flow
Chapter 3 Dubbing/Editing
39