Related Manuals for Lithium Cycles Super73-V2
Summary of Contents for Lithium Cycles Super73-V2
- Page 1 Owner’s Manual User manual Assembly, Maintenance, and Warranty Model: Super73-V2 2862 Walnut Avenue, Suite D - Tustin, CA, 92780 Phone: 1.949.313.6340 • E-mail: info@lithiumcycles.com...
- Page 2 Not to be reproduced wholly or in part without the written permission of Lithium Cycles. ©Copyright 2018 Lithium Cycles, Publication 1 issue 1. Updated September 2018 2862 Walnut Avenue, Suite D - Tustin, CA, 92780 Phone: 1.949.313.6340 • E-mail:...
-
Page 3: Table Of Contents
TABLE OF CONTENTS You are now part of the Super73 owner’s circle. Before jumping on your new vehicle, please keep in mind a few important safety tips and maintenance recommendations to ensure the best experience. For the latest information, please refer to our website www.lithiumcycles.com/pages/owners PAGE:... -
Page 4: Welcome
WELCOME We’re glad to have you as part of our Super73 rider community. Let the adventures begin. Please read this owner’s handbook before riding in order to become thoroughly familiar with the correct operation of your bike’s controls, its features, capabilities, and limitations. - Page 5 REGISTER YOUR SUPER73 In order to validate your warranty your Super73 must be registered. Each Super73 has a unique serial number to help us track your purchase and guarantee the quality and service of your bike. Record the following information for future reference: Location or website of purchase: …………………………………………………………...
- Page 6 BEFORE YOU BEGIN 1. CHARGE THE BATTERY OVERNIGHT. An initial charge will help condition your battery cells and allow for optimum performance throughout its life. Please note that the charger indicator light may turn green, indicating a complete charge, before the conclusion of the night. Allow the charge to continue for at least 8 hours.
-
Page 7: Unboxing
. UNBOXING WHAT’S IN THE BOX • Bike • Front Wheel • Pedals • Welcome Kit *Battery and Charger shipped separately TOOLS NEEDED • Box Opening: Brute Force • Pedal Install: Pedal wrench or 15mm open-end wrench • Zip-Tie Cutting: Flush Cutters •... -
Page 8: Assembly
ASSEMBLY IMPORTANT: IN ORDER TO VALIDATE MANUFACTURER WARRANTY ASSEMBLY BY E-BIKE SPECIALIST IS REQUIRED. Please read and refer to the following guide to correctly and safely assemble this model: 1. Before opening the box, lay the box down with the ‘Super73’ logo facing up. Opening the box in any other way may cause the inner contents to fall out, resulting in damage. - Page 9 3. We strongly recommend having a second person assist with lifting the bike out of the box; engage the kickstand and set the bike upright on a clutter-free floor space. 4. Remove the front wheel from its box (this is where that welcome kit is located!), loosen the wheel nuts and slide into drop out.
- Page 10 5. Use a pair of flush cutters to cut all fluorescent yellow cable ties holding the handlebar to the frame and a pair of scissors to remove all the protective foam. NOTE: WE HIGHLY RECOMMENDED TO HAVE A SECOND PERSON PLACE HIS/HER HAND UNDER HEADSET TO ENSURE COMPONENTS DO NOT FALL DURING ASSEMBLY.
- Page 11 7. Reinstall the riser clamps with the handlebar centered and at desired angle. Make sure the handlebar harness rests between the handlebar risers and below the handlebar. Tighten the riser clamp bolts and coupling nuts to a torque of 15-20 lb/ft. 8.
- Page 12 NOTE: the following pictures dictate the factory recommended brake line and cable routing. Connect the handlebar harness, and all other connectors, by aligning the alignment arrows stamped on each connector. (RED TO RED, YELLOW TO YELLOW, BLACK TO BLACK) Double-check all connections starting from the motor controller, under battery tray, and following each electrical cable.
- Page 13 10. Install the pedals using a pedal wrench or a 15mm open-end wrench. Look for a small L/R on each pedal and install on corresponding crank. The right pedal is installed in a clockwise direction. The left pedal is installed by turning counter clockwise. 11.
-
Page 14: Operating Your Super73
Operating Your Super73 1. INSERT THE BATTERY A. Make sure the battery is fully charged (the LED on the charger should be green). B. With one hand on the frame, use the other hand to slide the battery horizontally onto the battery tray on the frame. - Page 15 BEFORE THE FIRST RIDE If you have purchased your bike from a specialist dealer, they must provide the electric bike in a condition ready to ride in order to ensure safe operation. SAFETY CHECK 1. WHEELS Check the tires’ condition, alignment and air pressure. Check the tires and wheels for damage, cracks and deformation.
- Page 16 4. TURNING ON THE LIGHTS To turn on your headlight and rear lights tap the FIRST RIDE light/power button once. Do the same to turn them off. 5. TURNING OFF YOUR BIKE When you are done riding your Super73 it is important to turn off the power properly.
-
Page 17: What You Need To Know/Safety
WHAT YOU NEED TO KNOW GENERAL WARNINGS Like any sport, bicycling involves risk of injury and damage. By choosing to ride a bicycle, you assume the responsibility for that risk, so you need to know, and practice the rules of safe and responsible riding and the proper use and maintenance of this bicycle. Proper use and maintenance of your bicycle reduces risk over injury. - Page 18 Lithium Cycles recommends 15-20 P.S.I. for the front and rear tires on the Super73 for street use. And 15-18 P.S.I. for off road riding.
- Page 19 • Any aftermarket changes to your Super73 bike not expressly approved by Lithium Cycles could void the warranty and create an unsafe riding experience.
-
Page 20: Maintenance
It will go away. Depending on the frequency of use, you may need to replace the brake pads. You can purchase online brake replacement online or through Lithium Cycles. Wheels For optimum speed, wheels should be inflated to a minimum of 20 psi. -
Page 21: Warranty Information
Warranty claims only exist for initial faults that were already present at the time of handover. The SUPER73-V2 frame and fork have a 1year warranty. All electronics (battery, controller, motor, display and other electric components) have a 90 day warranty. -
Page 22: 2862 Walnut Avenue, Suite D - Tustin, Ca, 92780
You must contact your dealer before arranging repairs in order to ensure the quickest and most cost -effective way to deal with your issue. Shipping and disassembly instructions from either the dealer or Lithium Cycles must be fol lowed.