With Dimage Series Digital Cameras - Konica Minolta PROGRAM 2500D Instruction Manual

PF2500D_English_C404.qxd 2004.05.12
P MODE FLASH: THE BASICS
Flash range of the 2500 (D) in meters
Aperture
2.8
4
5.6
8
11
• If the subject is closer than 1m, use the flash off-camera with a cable.
• The flash range is for negative films. When using slide film,
underexposure may be apparent at the farther limits of the flash
range
.
16
03:33 PM Page 16
ISO 100 ISO 400
1 - 9 1 - 18
1 - 6 1 - 12
1 - 4.5 1 - 9
1 - 3 1 - 6
1 - 2.2 1 - 4.5

With DiMAGE series digital cameras

With the DiMAGE A1, A2, Z1, Z2, 7Hi, 7i, 7 and 5, fill-flash is used
when the P mode is selected.
1. Turn the camera and flash on.
2. Set the P exposure mode on
the camera.
3. Select the flash-metering mode
on recording-mode menu and
the flash metering mode on the
flash. The active metering
mode depends on the metering
mode selected on recording-
mode menu and the flash, see
chart below.
Recordring-mode
menu setting
ADI
P-TTL
• The flash-metering mode can not be selected with the
DiMAGE Z1, and Z2 on recording-mode menu. With
these digital cameras, always P-TTL metering will be
used regardless of the metering-mode switch.
Metering-mode Flash metering
switch position mode used
ADI ADI metering
TTL P-TTL metering
ADI
P-TTL metering
TTL
(Continued on next page)
17