Flash-Ratio Control (Varying The Intensity Of Individual Flash); Appendix - Konica Minolta PROGRAM 2500D Instruction Manual

PF2500D_English_C404.qxd 2004.05.12
OFF-CAMERA CABLES

Flash-Ratio Control (varying the intensity of individual flash)

28
03:33 PM Page 28
When using this flash with other
accessory flash units*, a 2:1 flash
ratio can be used. The flash ratio
controls the relative power of two
flash units. The 2:1 ratio indicates the
output difference between the main
light and fill light; the fill light controls
the depth of the shadows.
*5600HS (D), 5400HS, 5400xi, 5200i
• The flash ratio cannot be set with this
flash. The ratio must be set with the
compatible accessory flash unit. See
the flash manual for details.
• Ratio control cannot be used with the
DiMAGE series digital cameras and
Maxxum/Dynax 300si. The use of this
function may result in incorrect
exposures.

APPENDIX

29