Related Manuals for ISTEC 1800 SERIES
Summary of Contents for ISTEC 1800 SERIES
- Page 1 FLOWMETER ENGINEERING MANUAL 1800 SERIES FLOW MEASUREMENT & CONTROL SOLUTIONS 415 Hope Avenue, PO Box 618, Roselle, NJ 07203 Phone: (908) 241-8880 Fax: (908) 241-7288 www.istec-corp.com...
-
Page 2: Product Overview
For easy installation, all ISTEC flow meters up to 1½’’ are available with union connections; 2’’ and larger sizes are designed with standard flanges. The smooth running turbine, together with a self- aligning suspension bearing system and other innovative features provides superior reliability and accuracy that meets or exceeds AWWA standards. -
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS 1800 1805 1810 1811 1815 1816 1820 0.13 gpm 0.22 gpm 0.4 gpm 0.4 gpm 0.7 gpm 0.7 gpm 0.88 gpm 30 lph 50 lph 90 lph 90 lph 160 lph 160 lph 200 lph 6.6 gpm 11 gpm 26.32 gpm 26.32 gpm 43.86 gpm 43.86 gpm... - Page 4 DIMENSIONS 1800 1805 1810 1811 1815 1816 1820 ½’’(H) ¾” (A) 1" (H) 1" (D) 1½’’ (H) 1½’’ (D) 2"(H) Size 15mm 20mm 25mm 25mm 40mm 40mm 50mm 3/4" 3/4" 1-3/4" 1-1/4" 2" 7/8" 3-1/4" 20mm 20mm 45mm 31mm 50mm 21mm 83mm 3-3/4"...
- Page 5 FLOWMETER SPECIFICATION: 1800 SERIES AS MANUFACTURED BY ISTEC CORPORATION 415 HOPE AVENUE, ROSELLE, NJ 07203 The contractor shall furnish and install as shown on the plans a multi-wing turbine type Flowmeter. The Flowmeter shall be factory assembled, calibrated and tested, incorporating the following features: BODY The Flowmeter shall have a line size of ______ inch(s)/________mm(s).
Need help?
Do you have a question about the 1800 SERIES and is the answer not in the manual?
Questions and answers