Maintenance - Briggs & Stratton 1697090 Owner's Manual

MAINTENANCE

W A R N I N G
To avoid serious personal injury, always remove the battery pack from the tool
when cleaning or performing any maintenance.
W A R N I N G
When servicing, use only identical Briggs & Stratton replacement parts. Use of
any other parts may create a hazard or cause product damage.
W A R N I N G
It is not recommended to use compressed dry air as cleaning method of the
charger. If cleaning with compressed air is the only method to apply, always
wear safety goggles or safety glasses with side shields when using compressed
air to clean the tool. If the operation is dusty, also wear a dust mask.
GENERAL MAINTENANCE
• Brush or blow dust and debris out of the air vents using compressed air or a
vacuum. Keep the air vents free of obstructions, sawdust, and wood chips.
Do not spray, wash, or immerse the air vents in water.
• Wipe off the housing and the plastic components using a dry, soft cloth.
Do not use strong solvents or detergents on the plastic housing or plastic
components. Certain household cleaners may cause damage and may
cause a shock hazard.
STORAGE
• Always remove the battery pack before storing the charger or any time the
charger is unplugged.
• Do not place the battery pack in the sun or in a warm environment. Keep at
normal room temperature.
• If the battery will not be used for 3 months or more, please store the battery
in a room temperature environment. Please fully charge before storage.
W A R N I N G
Do not at any time let brake fluids, gasoline, petroleum-based products,
penetrating oils, etc. to come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
11