2. STOPPING THE ENGINE
After light work let the engine idle
for a while and turn the key off.
IMPORTANT
After long or heavy work allow
the engine to idle for 5~10 min-
utes and turn the key off.
RK55S,55SC-영문판-04.indd 3
3. WARMING UP
When starting the engine allow it to
warm up to operating temperature
by allowing it to idle 5-10 minutes to
ensure full lubrication and operating
temperature.
Failure to do so can shorten engine
life substantially.
►
WA R M I N G U P I N C O L D
WEATHER
Cold weather will change the vis-
cosity of the oil, resulting in a re-
duced oil pumping capacity, which
can cause damage to the engine if it
is not warmed up correctly.
It also causes problems with the hy-
draulic system and the synchro-
mesh in the transmission.
OPERATION
< WARMING UP TIME >
Temperature Time for warming up
Above 50°F
5~10 min.
50°F~ 3°F
10~0 min.
3°F~14°F
0~30 min.
30~40 min.
14°F~-4°F
Below –4°F
Over 40 min.
IMPORTANT
Ensure the handbrake (Foot
brake) is on during the warm-
ing period.
Failure to warm up correctly
can result in problems.
When the engine is warm push
down the clutch and engage the
main and auxiliary gear levers to
the required position.
2017-03-09 오전 11:16:38
4
4- 3
Need help?
Do you have a question about the RK55 Shuttle Shift Series and is the answer not in the manual?