Rural King RK55 Shuttle Shift Series Operator's Manual page 72

► TElESCOPIC STABIlIZERS
ADJUSTMENT
The stabilizers are intended for lim-
iting or preventing implement side
movement.
There should be no clearance (Po-
sition A) during implement transport
and when working with grades, roll-
ers mowers, seeders, drills and sim-
ilar implements. However, a slight
play is necessary (Position B) when
working with ploughs, harrows,
ditchers, cultivators and the like:
RK55S,55SC-영문판-03.indd 27
That is when working with "draft
control".The length of stabilizers is
adjusted by removing the pin and
rotating the turn buckle barrel by
which the threaded ends are inter-
connected.
T45O33A
DESCRIPTION OF TRACTOR CONTROlS
Position of
Top Link
► ADJUSTMENT OF THE TOP
lINK
Lengthening or shortening the top
link will change the angle of the im-
plement.
Top Link
Lock Nut
T45O33A
3 - 7
2017-03-09 오전 11:13:49
3