Rural King RK55 Shuttle Shift Series Operator's Manual page 67

DESCRIPTION OF TRACTOR CONTROlS
IMPORTANT
Do not hold the lever in the

" P u l l " o r " P u s h " p o s i t i o n
once the remote cylinder has
reached the end of the stroke.
As this will cause oil to flow
through the relief valve. Forc-
ing oil through the relief valve
for extended periods will over-
heat the oil.
When Using the tractor hy-

draulic system to power front
loader,do not operate the
boom and bucket cylinders si-
multaneously.
3 - 
RK55S,55SC-영문판-03.indd 22
► REMOTE HyDRAUlIC CON-
T R O l VA lV E C O U P l E R
CONNECTING AND DISCON-
NECTING
< CONNECTING >
1. Clean both couplers.
. Remove dust plugs.
3. Insert the implement coupler to
the tractor hydraulic coupler.
4. Pull the implement coupler slight-
ly to make sure couplers are firm-
ly connected.
<DISCONNECTING >
1. Lower the implement first to the
ground to release hydraulic pres-
sure in the hoses.
. Clean the couplers.
3. Relieve pressure by moving hy-
draulic control levers with engine
shut off. Pull the hose straight
from the hydraulic coupler to re-
T45O334A
lease it.
4. Clean oil and dust from the cou-
pler, then replace the dust plugs.
2017-03-09 오전 11:13:46