Rural King RK55 Shuttle Shift Series Operator's Manual page 55

DESCRIPTION OF TRACTOR CONTROlS
► DPF REGENERATION SWITCH
Name and Operation of Switch
-
Regeneration button
ACK
Regeneration stop (re-
generation deactiva-
tion) button
3 - 10
RK55S,55SC-영문판-03.indd 10
Operation of Monitor Panel
(meter panel) lCD
(Regeneration progression and precautions)
1. When the regeneration process for the DPF system is started,
. While the regeneration process is performed, exhaust gas is
High exhaust tem-
perature indicator
3. Perform regeneration in a location far away from others.
4. Make sure that there is no flammable materials near the ex-
5. Do not stop the engine until the indicator is automatically
Button: Pressing for 3 sec- (Operating stationary regeneration function)
1. Park the tractor on safe level ground, and confirm that there is
onds (Refer to "Operat-
ing stationary regeneration
. Apply the parking brake.
function")
3. Put the shift lever in the neutral position.
Engine warning
4. Set the engine speed to the idle (minimum RPM) speed.
indicator
5. Idle the engine for 3 to 4 minutes.
6. Press the Regeneration button for approximately 3 seconds.
R e g e n e r a t i o n
7. The engine speed is automatically increased and the "Station-
warning indicator
8. The regeneration process typically takes 5 to 30 minutes.
Button:
Pressing once → Stationary
The stationary regeneration can be stopped, resumed or deacti-
regeneration is stopped.
vated with this button.
Pressing again → Stationary
regeneration is resumed.
Function and Operation
the indicator comes on.
very hot. Never touch the DPF and its surrounding parts to
avoid personal injury.
haust pipe.
turned off. (Otherwise, it can cause a critical failure.)
no flammable materials near the exhaust pipe.
ary regeneration" function is activated.
2017-03-09 오전 11:13:29