Kia Sorento 2001 General Information Manual page 279

2001 > 1.8L DOHC >
Removal
Engine coolant temperature sensor is located nesr thermostat.
1. Disconnect engine coolant temperature sensor connector.
2. Remove engine coolant temperature sensor.
Installation
1. Install a new washer and engine coolant temperature sensor onto engine.
Tightening torque:18-22 lb-ft(25-29 N·m, 2.5~2.9 kg-m)
2. Connect engine collant temperature sensor connector.
3. Star engine and check for coolant leakage.
Inspection
1. Measure resistance of sensor using ohmmeter.
Water temperature°F(°C)
2. If resistances are not within specification, replace engine coolant temperature sensor.
68°F(20°C)
176°F(80°C)
Resistance(kΩ)
2.45± 0.24
0.322± 0.032