Playing A Tape In Various Modes - Sony XR-C9100 Operating Instructions Manual

Fast-winding the tape
During playback, push the SEEK/AMS
control up or down and hold.
Fast-forward
Rewind
To start playback during fast-forwarding or
rewinding, press (MODE).
Locating a specific track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, push the SEEK/AMS
control up or down momentarily.
To locate succeeding
tracks
To locate
preceding tracks
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
— there is noise between tracks
— there are long sections of low volume or quiet
sections.
Changing the display item
Each time you press (DSPL), the item changes
as follows:
z Tape playback
MOTION DISPLAY* Z
* All the items above are scrolled in the display
one by one in order.
Playing a tape in various
modes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR
B or C system.
•B. Skip (Blank Skip) skips blanks longer than
eight seconds.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•Repeat (Repeat Play) repeats the current
track.
* Dolby noise reduction manufactured under
Searching for the desired track
— Intro scan
1
2
z Clock
3
4
To go back to normal playback mode, select
"Intro off" in step 3 above.
license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D
symbol a are trademarks of Dolby
Laboratories Licensing Corporation.
Press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
SET UP PLAY MODE
SHIFT
1 2 3 4 5
Press (4) (PLAY MODE) repeatedly until
"Intro" appears.
Each time you press (4) (PLAY MODE),
the item changes as follows:
Intro n NR n B. Skip n ATA
PLAY MODE
Press (5) (n) to select "Intro on."
PLAY MODE
Intro Scan starts.
Press (SHIFT).
EN
A
REP
6 7 8 9 1
9