Cd/Md Unit; Playing A Cd/Md - Sony XR-C5100R Operating Instructions Manual

Attenuating the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons again.
Note
If you connect an optional power amplifier to the LINE
OUT and do not use the built-in amplifier, the beep tone
will be disabled.
Changing the illumination color
Press (1) while pressing (SEL).
You can choose the color between amber and
green.
EN
14
With Optional Equipment

CD/MD Unit

This unit can control a maximum of seven
external CD/MD units in this configuretion:
CD unit - maximum of five
MD unit - maximum of five.
Any combination up to seven will work.

Playing a CD/MD

Press (SOURCE) until the desired unit
indication appears on the display.
CD/MD playback starts.
When an CD/MD unit is connected, all the
tracks play from the beginning.
Selecting CD/MD units (when
several CD/MD units are connected)
Press (MODE) repeatedly to select the desired
CD/MD unit.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
Elapsed playback time
Disc name (XR-C6100R only)*
Track name*
Clock
1 If there is no prerecorded name for a CD or MD, "NO
*
NAME" appears in the display.
2 If the track name of an MD is not prerecorded "NO
*
NAME" appears in the display.
Tip
If the name of the MD is too long, only the first eight
characters appear in the display.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip the tracks.
To locate the succeeding tracks
SEEK
AMS
To locate the preceding tracks
$
$
1
$
2
$