Toyota RAV-4 2009 Instruction Manual page 3

8
10
10. Carefully remove the factory grille from behind the
bumper cover. The factory grille fits around the
bumper cover so do not force the removal. Take
your time and do not damage the painted bumper
cover.
13. Clean the back of the emblem and install the sup-
plied double faced tape (where shown).
13
9
11. Remove the factory weatherstrip from across the
top of the factory grille and remove the clips that
retain the weatherstrip (to be reused on the mesh
grille).
13
14. Peel off the double faced tape backing, align the
mounting tabs through the slots in the emblem
backing plate and press the emblem firmly in place
to set the tape.
11
12. Remove the factory grille emblem by pushing in on
the clips and push the emblem off.
15. Trim the factory tabs protruding from the back of
the emblem plate prior to installation onto the
mesh grille to keep the tabs from contacting the
mesh.
3
12
15