Connection System - Barry B-Net Technical Specifications And Installation Manuallines

4.3 Connection
C S
ONNECTION YSTEM
Barry B-Net Systems have a connection system with connecting loops on each end of the
net.
RACE COURSE SIDE
Step 1: Unroll the nets and overlay an end section. Ensure that the up-hill net is on
race course side.
Step 2: Insert support poles through the top and bottom connecting loop of
both nets to be connected. Make sure that the loop or stitching is not
damaged.
Step 3: Drill into the snow the two supports poles (ref. 4.2 Drilling).
RACE COURSE SIDE
©2017, Barry Cordage Ltd.
End section
End section
BARRY B-NET SYSTEM • INSTALLATION GUIDELINES rev. 5
DOWNHILL
DOWNHILL
Fig. 7: Connection
(not to scale)
14