Cgo1 Led Status - YUNEEC CGO1 Manual

5. Press and release SHUTTER BUTTON on the left-hand side
of the transmitter. ST24 will emit an audible tone one time,
and Start capture/Capture complete appears at the top of
screen.
6. Press RECORD BUTTON on the right-hand side of the trans-
mitter. "Start record" will appear at the top of the screen, along
with record time displayed on the right side of the screen.
7. Press RECORD BUTTON again. "Stop record" will appear at
the top of the screen.
8. Check the Video Recording via ST24:
Press Landing Button > System Settings > FPV Quick Review
IMPORTANT NOTE:
your CGO1 to ensure your video is properly stored in the
we recommend pressing and holding the SHUTTER Button
for 2 seconds until the Video/Photo and Wi-Fi indicator lights
and help preserve your precious photo/

CGO1 LED STATUS

Video/Photo Indicator Light:
WiFi Indicator Light:
Power On(default):
Red
Blue
Red Video/Photo Indicator
Light is ON, 10 seconds after,
12