Radio; Searching For Stations Automatically - Automatic Tuning; Tuning In By Adjusting The Frequency; Manual Tuning - Sony XR-1790 Operating Instructions Manual

Radio

Searching for stations
automatically
— Automatic tuning
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press either side of the SEEK/MANU
button momentarily to search for the
next station (automatic tuning).
SEEK
MANU
For lower
frequencies
The scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
When an FM stereo program with a sufficient
signal strength is tuned in,
ST
the "ST" indication will appear.
To avoid the automatic tuning from stopping on
stations too frequently, press the LCL button
momentarily to get the "LCL" indication (local
seek mode).
Only the stations with relatively strong signals will
be tuned in. The local seek mode functions only
when the automatic tuning is in operation.
SEEK
MANU
For higher
frequencies
Tuning in by adjusting the
frequency

— Manual tuning

1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
SEEK
MANU
For lower
frequencies
PREVENT ACCIDENTS!
While driving, use the automatic tuning and
the memory preset tuning instead of the
manual tuning.
Memorizing stations
automatically
— Automatic memory function
Stations with the clearest reception are
automatically searched and memorized on
each band (FM1, FM2 and AM). Up to 6
stations on each band can be stored on the
preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n AM n FM1
2
Press the TUNER/A MEM button for more
than two seconds.
A MEM
TUNER
The unit will start scanning the selected
band and automatically memorize the
tuned stations on the preset number button
1 through 6.
SEEK
MANU
For higher
frequencies
US
7