Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Halyard ON-Q ONDEMAND
Summary of Contents for Halyard ON-Q ONDEMAND
- Page 1 Pain Relief System PUMP with ONDEMAND BOLUS BUTTON Instructions for Use...
- Page 3 ON-Q* Pump with ONDEMAND* Bolus Button Instructions for Use • There is no alarm or alert when flow interruption Important Information occurs, therefore, life-supporting medications whose usage may cause serious injury or death Please read the entire document before operating due to stoppage or under-delivery are not the ON-Q* device.
- Page 4 • It is the responsibility of the healthcare provider to set, close tubing clamp. Replace pump if necessary. modify Patient Guidelines provided with the pump • Do not discard the pump and contact Halyard Health for as appropriate for your patients’ clinical status and product return instructions.
-
Page 5: Indications For Use
Description of Device: (Figure 1) temperature and will decrease approximately 1.4% per 1°F/0.6°C decrease in temperature. The ON-Q* Pump with ONDEMAND* device incorporates a bolus • If refrigerated, allow pump to reach room temperature device. The ONDEMAND* device delivers a continuous infusion before using. -
Page 6: Priming The Administration Set
Instructions for Use Caution: Do not fill less than the labeled fill volume or exceed the maximum fill volume. (Table 1) Use Aseptic Technique Table 1: Fill Volume Filling the ON-Q* Pump: (Figure 2) Note: Follow hospital protocols and applicable regulations for Labeled Retained Maximum Fill Vol. -
Page 7: Starting Infusion
RIGHT WAY Figure 3-A Figure 3-C Figure 3-D Orange Bottom Bolus Refill Indicator Warning: Do not pull the red tab upwards as breakage could occur (Figure 3-B). If red tab is not removed or breaks while removing, Bolus Activation continuous delivery will occur. This delivery may 1. -
Page 8: Storage Conditions
• Infusion is complete when pump is no longer inflated. • Close clamp, disconnect and dispose of pump according to your institution’s protocol. Note: If pump did not perform as expected do not discard. Contact Halyard Health for product return instructions at: HalyardIrvineProductComplaint@hyh.com or 1-800-448-3569. Technical Specifications Delivery Accuracy: When filled to the labeled volume, basal flow rate accuracy is ±15% and bolus dose accuracy... - Page 9 Additional U.S and Foreign Patents may be issued and/or pending. *Registered Trademark or Trademark of Halyard Health, Inc. or its affiliates. © 2015 HYH. All rights reserved. For more information, please call +1.949.923.2400 •...
- Page 12 Halyard Belgium BVBA, Leonardo Da Vincilaan 1, 1930 Zaventem, Belgium Sponsored in Australia by Surgical Specialties Pty Ltd; 1/17 Rodborough Road, Frenchs Forest, NSW 2086 Registered Trademark or Trademark of Halyard Health, Inc., or its affiliates. © 2015 HYH. All rights reserved. 2017-02-14...
Need help?
Do you have a question about the ON-Q ONDEMAND and is the answer not in the manual?
Questions and answers