Onkyo TX-NR696 Instruction Manual page 29

„ 5.1 Channel System + ZONE SPEAKER (European, Australian and Asian models)
MAIN ROOM
3
2 1
6
5 4
ZONE 2
8 7
MAIN ROOM: This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation"
( p19).
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 5.1-ch playback in the main room
(where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also,
different sources can be played back in both rooms.
Contents Connections
≫
29
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p139)
Speaker Setup
Speaker Channels 5.1 ch < >
Subwoofer Yes
Height Speaker ---
Zone Speaker Zone 2
Zone 2 Lineout Zone 2
Bi-Amp No
Speaker Impedance 6ohms or above
Select how many speakers you have.
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height Speaker: ---
• Zone Speaker: Zone 2
• Zone 2 Lineout/(Preout): Zone 2
• Bi-Amp: No
• Speaker Impedance: Any value
( p25)
Setup
When video and audio via HDMI
input are output to ZONE 2, set
"1. Input/Output Assign" - "TV Out /
OSD" - "Zone 2 HDMI" ( p115)
to "Use" on the Setup menu.
≫
Next