Using The Rotary Commander - Sony CDX-C5750 Operating Instructions Manual

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can also control optional CD or MD units
with the rotary commander.
By pressing buttons (the SOURCE
and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TUNER n CD n MD* n TV*
* If the corresponding optional equipment is
not connected, this item will not appear.
Pressing (MODE) changes the operation
in the following ways;
• Tuner: FM1 n FM2 n AM
• CD unit: CD1 n CD2 n ...
MD unit: MD1 n MD2 n ...
TV/Video: TV n VIDEO1 n VIDEO2
12
By rotating the control (the
SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
(MODE)
•Tune in stations automatically. Rotate and
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
•Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.
and hold the control until you locate the
specific point in a track, then release it to
start playback.
hold the control to find a specific station.
number buttons.
Press (ATT) to
attenuate the sound.
Press (OFF) to
turn off the unit.