Installation; General - Electrolux ERI522DSD User Manual

INSTALLATION

GENERAL

This appliance should be connected to the power supply
by a recognized fitter who is familiar with, and works
according to the correct safety regulations. This appliance
meets the European requirements.
IMPORTANT
• The minimum distance between the supporting
surface for the cooking vessels on the gas hob and
the lowest part of the range hood must be not less
than 65 cm. For use with an electric, ceramic or
induction hob, this distance must be at least 60 cm.
• If the cooker hood is to be fitted to an existing duct
no other appliances, such as a geyser or heater, may
be connected to that same duct.
• Consider local regulations with respect to the
ventilation of gas appliances.
• The shorter the duct, and the fewer the bends in it,
the better the cooker hood will work.
• Before you start drilling check that there are no
installation cables present.
• The connecting pipe for the cooker hood has a
diameter of 150mm, and is also supplied with a
reducer to 120mm if required. It is best also to use a
flue pipe of the same diameter.
Product list
1x
1x
1x
2x
(2,9 x 9,5)
10x
(3,5 x 16)
Dimensions
ERI522DSD
Ø150
256
300
ERI842DSD
Ø150
256
300
100
330
492
520
100
330
832
860
9