Steps - Electrolux ERI522DSD User Manual

12 electrolux.com.au
INSTALLATION
STEPS TO INSTALL
1. Open the panel.
2. Remove the grease filter.
3. Disconnect the plug connection for the controls and
also the plug connection for the LED lighting.
(CONTINUED)
4. First remove the 6 screws, followed by the frame.
5. Use a saw to create a recess in the bottom side of
the cupboard (at a distance of at least 650mm from a
gas hob). Refer to the measurement drawing for this.
6. Attach the unit with the 10 screws provided (12a).
7. Put the frame into position with the 6 screws.
8. Re-fit the plug connection for the controls and also
the plug connection for the LED lighting.
9. Put the grease filter into position and close the panel.
330mm