Mobile Phone Voice Recognition - Mercedes-Benz Audio 20 Supplement Manual

Mobile phone voice recognition

52
Add a call ( page 50).
X
Y
or
Answer an incoming call (
X
To select Conference
X
turn and press the controller.
The new participant is included in the confer-
ence call. Conference Call
the telephone menu.
Incoming call during an existing call
(call waiting)
The call waiting function depends on your
mobile phone network provider and your mobile
phone. Depending on the mobile phone used,
behavior when answering a call may vary (see
the manufacturer's operating instructions).
Call waiting: if you receive a call while already
in a call, a message is shown. You also hear a
tone. You can decide whether to accept or reject
the call.
Call waiting in two-telephone mode: if you
receive a call on a different mobile phone during
an existing call, the existing call is terminated.
Accepting
To select w Accept: press the controller.
X
or
Press 6 on the multifunction steering
X
wheel.
The incoming call is active. Depending on the
mobile phone used, the call which was previ-
ously active is put on hold or ended (see the
manufacturer's operating instructions). If the
call is on hold, you can switch back and forth
between the two calls (call waiting)
( page 51).
Y
i
Depending on the mobile phone, you may
also be able to accept the incoming call (call
waiting) on your mobile phone. This function
and behavior depends on your mobile phone
network provider and the mobile phone (see
the manufacturer's operating instructions).
page 52).
Y
in the telephone menu:
is displayed in
Rejecting
To select = Reject: turn and press the
X
controller.
or
Press ~ on the multifunction steering
X
wheel.
The behavior after the call is rejected depends
on your mobile phone and mobile phone net-
work provider.
Option 1: The originally active call is ended
and the incoming call is accepted.
Option 2: Both calls are ended.
Ending an active call
To select = in the telephone menu: turn
X
and press the controller.
or
Press ~ on the multifunction steering
X
wheel.
The active call is ended.
Mobile phone voice recognition
You can use this function to start or end voice
recognition on your mobile phone which is con-
nected as the main telephone. Further informa-
tion on the voice recognition service (see the
manufacturer's operating instructions).
Starting the mobile phone voice recognition
Connect the mobile phone to the multimedia
X
system ( page 45).
Y
Press and hold the ó button on the multi-
X
function steering wheel for more than one
second.
The mobile phone voice recognition is activa-
ted depending on the vehicle's equipment.
A message appears on the multimedia system
display.
Ending the mobile phone voice recognition
Press 8 on the multifunction steering
X
wheel.
The mobile phone voice recognition is stop-
ped.