Mercedes-Benz Audio 20 Supplement Manual page 48

Connecting/disconnecting a mobile phone
46
This visibility is for restricted periods of time
on some mobile phones (see the manufactur-
er's operating instructions).
Set the Bluetooth
X
mobile phone if necessary.
®
The Bluetooth device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions). The name
can be freely selected.
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
ing information is transmitted after you connect
the main telephone:
Phone book
R
Call lists
R
Text messages and e-mail
R
Further information on allowing or suppressing
the automatic download of the phone book
( page 54).
Y
The battery of the mobile phone should always
be kept sufficiently charged in order to prevent
malfunctions.
i
Not all mobile phones available on the mar-
ket are equally suitable. You can obtain fur-
ther information about suitable mobile
phones and about the connection between
the mobile phone and the multimedia system
on the Internet at http://www.mercedes-
benz.com/connect.
You can also obtain more information by call-
ing.
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes (1-800-367-6372).
In Canada, you can get in touch with the Cus-
tomer Relations Center on 1-800-387-0100.
i
Some displays (e.g. the signal strength) are
shown depending on the supported version of
the Hands-Free Profile.
Procedure and general information
Authorizing a mobile phone (connect-
ing)
Before using your mobile phone with the multi-
media system for the first time, you will need to
®
device name for the
®
profiles, the follow-
search for the phone (
authorize it ( page 47). Depending on the
Y
mobile phone, authorization either takes place
by means of Secure Simple Pairing or by enter-
ing a passkey. The multimedia system automat-
ically makes the procedure that is relevant for
your mobile phone available. You can recognize
Secure Simple Pairing by the fact that a code is
displayed on the mobile phone and on the mul-
timedia system. You can recognize the passkey
system by the fact that you have to enter a code
on the mobile phone and on the multimedia sys-
tem. The mobile phone is connected automati-
cally after authorization.
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone. You can
also start the search procedure and authoriza-
tion on the mobile phone (
Device-specific information on authorizing and
®
connecting Bluetooth
can be obtained from an authorized Mercedes-
Benz Center or via the Internet at http://
www.mercedes-benz.com/connect.
You can authorize up to 15 mobile phones. All
authorized mobile phones are automatically
reconnected.
Symbols in the device manager
Sym- Explanation
bol
Mobile phone connected to the
multimedia system
Main telephone with full range of
functions
Additional telephone for incoming
calls in two telephone mode
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of the multimedia
system or deactivate Bluetooth
phone.
If you no longer want the Bluetooth
to be established automatically, the mobile
phone must be de-authorized (disconnected)
( page 48).
Y
page 47) and then
Y
page 48).
Y
-capable mobile phones
®
on your mobile
®
connection