Tool attachments can become loose or Make sure that any attachments are se- break and fly apart, propelling articles at curely assembled. the operator and others in the work area. WWW.SGS-ENGINEERING.COM PAGE 2 PAGE 3...
Air tools can inadvertently propel fasten- Use only parts, fasteners and accessories ers or other materials in work area. recommended by SGS Engineering. INHALATION HAZARD Keep work area clean and free of clutter. Keep children and others away from tool...
8. Check hoses for wear before individual use. Make certain that all con- repaired before use. nections are securely fastened. Use only accessories identified by SGS En- Use of an accessory not intended for a gineering as suitable for use with specific specific tool increases the risk of injury to tools.
4. Peel off the back of the self adhesive sanding sheet and stick it to the backing pad. Take care that it is positioned centrally. 5. IMPORTANT: Only use sanding sheets designed for use with this type of 150mm dia sanding pad. WWW.SGS-ENGINEERING.COM PAGE 8 PAGE 9...
The tool should be lubricated before each use with air tool oil (not in- place for more than a moment. cluded). Air tool oil is available from SGS Engineering. During continuous operation, the tool should be oiled every 1 to 2 hours. This may be done 5.
SGS Engineering (UK) Ltd West Side Park Raynesway Derby, DE21 7AZ EC Declaration of Conformity This is an important document and should be retained MANUFACTURER’S NAME: SGS Engineering (UK) Ltd AIR SANDER TYPE OF EQUIPMENT: SAT601 PART NUMBER: APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD:...
Need help?
Do you have a question about the SAT601 and is the answer not in the manual?
Questions and answers