Replacing The Rollers; Removing Batteries; Cleaning And Maintenance - Remington Reveal Perfect Pedi CR4000 User Manual

ENGLISH
, HOW TO USE
• Clean and dry the area you plan to treat.
, Tip: Place a towel under your feet to catch any hard skin removed during
treatment.
• Remove the protective cap from the roller head.
• To switch the Perfect Pedi on, slide the switch up and the roller will start to
rotate.
• Glide the roller gently over the hard skin you wish to remove. Do not press
too hard.
• After 2-3 seconds, stop and check the skin. Repeat until you have the
desired effect.
• DO NOT use in the same area for more than 2-3 seconds at a time.
• If the skin becomes sore or inflamed, stop the treatment immediately.
• To switch the Perfect Pedi off, slide the switch downwards.
• After use, wipe or rinse your feet with warm water.
• Apply foot cream for smooth results.

, REPLACING THE ROLLERS

• The rollers should last for several treatments.
• You should replace the rollers immediately if you see signs of damage, or it
begins to take longer to achieve your normal results.
• Replacement rollers are available: SP-CR1
C CLEANING AND MAINTENANCE
• To ensure long lasting performance of your Perfect Pedi, clean after each
use.
• The easiest and most hygienic way to clean the roller head is by using the
cleaning brush supplied.
• This product is not washable.
• Ensure the Perfect Pedi is turned off when cleaning.
• From time to time wipe the handle with a damp cloth.
• When not in use, store with the protective cap attached.

REMOVING BATTERIES

• To open the battery compartment, slide the battery compartment lid
downwards.
• Lift the batteries from the compartment.
5