Table of Contents
Advertisement
Available languages
Available languages
6
Connect to your TV (cont.)
If your TV does not have
HDMI, use Optical
HDMI IN
TV
OPT
OUT
Connect the included Optical cable between the
TV and sound bar. With certain TV models you may
need to turn the internal TV speakers off or set the
sound to external speaker.
INPUTS
Blu-ray
FIRMWARE
AUX IN
Cable
OPT IN
POWER
Some older TV's have only an analog output
connection. In this scenario, the TV does all the
switching between sources and the Studio Advance is
always set to INPUT #4. A Dolby Digital or DTS digital
audio signal cannot be passed through a TV's analog
output connection. The best audio signal quality that
can be reproduced using this method is two-channel
stereo audio. This method is the least-preferred
connection method of the four described here.
All sources into your TV with 3.5mm
analog mini-jack to the sound bar
HDMI IN
Blu-ray
Cable
TV
AUX
OUT
INPUTS
FIRMWARE
AUX IN
OPT IN
POWER
- Quick Links:
- For Further Assistance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the StudioAdvance and is the answer not in the manual?
Questions and answers
My studio advance soundbar will not turn on. I checked all the connections. It worked flawlessly before but just will not power on.
The provided context does not include specific troubleshooting steps for a Definitive Technology Studio Advance soundbar that won't turn on. However, general reasons could include power issues, faulty connections, or a malfunctioning unit. Ensure the power cable is securely connected, try a different power outlet, and check if the power button on the soundbar is functioning. If the issue persists, consult the user manual or contact technical support.
This answer is automatically generated