Memory Function; Cleaning And Maintenance - Remington Keratin Protect Auto Curler CI8019 User Manual

ENGLISH
• Press and hold the curling button. The hair will then automatically be drawn
in the curling chamber. Do not release the curling button until the barrel has
stopped rotating. If you release the button too early the curler will stop
winding and release the hair.
• After your hair has curled into the chamber, and the barrel has stopped
rotating, the curl timer will begin.
• After your selected time you will hear three beeps indicating you can
remove your curl.
, NOTE: If you select 0 on the timer, or you release the curling button before
the barrel has stopped rotating, you will not hear any beeps.
, TIP: Let the curls cool before further styling or brushing, this will ensure the
curls set.
• Repeat this process around the head to create as many curls as desired.
• After use, press and hold the On/Off button for 2 seconds to turn off then
unplug the appliance.
, Er2 Error Warning
, NOTE: If you insert too much hair the unit may stop winding, beep, release
hair, turn off and display Er2 on the digital display screen. This is to prevent
the unit from jamming.
• If this occurs, remove hair, press the power button and repeat with a smaller
section of hair.
, PRO+ Setting
• To activate, press the temperature setting button until the PRO+ icon
appears on the LCD display.
• This automatically selects the temperature at 185°C for healthier styling.

, Memory Function

• Each time you use the product it will automatically set to the last
temperature it was used on.
C CLEANING AND MAINTENANCE
• After use, ensure the product is cool and wipe all the surfaces with a damp
cloth.
• You may use the provided tool to aid in cleaning the barrel. To use, lift the
rubber flap, insert tool and twist to clean and then remove.
• Don't use harsh or abrasive cleaning agents or solvents.
7