Remington MB4122 User Manual page 5

ENGLISH
, ATTACHING AND REMOVING THE ADJUSTABLE COMB
• Ensure the product is switched off.
• To attach the comb place the comb of the beard trimmer so that the teeth
of the comb sit on top of the teeth of the blades.
• Slide on the comb until it sits securely on the beard trimmer.
• To remove the adjustable comb, ensure the trimmer is switched off.
• Push the back of the comb upwards and lift away from the beard trimmer.
, Note: the on/off switch controls the adjustable comb lock switch to ensure
consistent grooming results. When the trimmer is turned on the comb lock
switch is enabled. When the trimmer is turned off, the comb lock switch
needs to be manually disengaged in order to adjust the length setting. This
is when the comb length is able to be adjusted.
, TO THIN AND TAPER THE BEARD/MOUSTACHE
• Attach the adjustable comb to the trimmer blade and select the desired
length by sliding the adjustable comb up or down.
• The setting will appear on the length position indicator. If you are trimming
for the first time start with the maximum trimming length setting.
• Once you have your desired adjustable comb length turn the trimmer on,
this will secure the length increment on the comb.
• Place the flat top of the trimmer comb against the skin.
• Use motions towards edge of beard/moustache line to trim to desired
locations in facial area and away from beard in neck area.
, TRIMMING EDGE OF SIDEBURNS
• Start with edge of sideburn, and with the trimmer blades resting lightly
against your skin, use motions towards edge of sideburn line to trim the
desired locations in facial area.
, TRIMMING THE NAPE OF YOUR NECK
, Note: You will need a hand mirror for this operation if performing it alone.
• Remove the comb or adjustable comb from the wide trimmer. Use your
fingers to lift the hair at the base of your head up off the neck.
• Your index finger should be covering the roots of the hairs you are lifting to
prevent accidental removal by the beard trimmer.
• Using your other hand, hold the trimmer to the base of your neck with the
cutting unit facing up, and move the trimmer up the length of the neck until
it touches your finger covering the hair roots at the base of your head.
• Be sure to move the unit slowly when performing this operation and to
keep the hair roots at the base of your head out of the way of the trimmer.
5