Related Manuals for Welcare WBA100
Summary of Contents for Welcare WBA100
- Page 1 Children’s Upper Arm Bedwetting Alarm for Ages 5+ Model: WBA100 Instruction Manual & Warranty Information...
- Page 2 Welcare Stay-Dry Bedwetting Alarm. Bedwetting Alarm Model: WBA100 Please keep this instruction manual in a safe place where it is readily available. The illustrations in this manual may differ slightly from the product itself. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm...
-
Page 3: Table Of Contents
Contents Important Safety Information ..4 Bedwetting Information ... . 5 Features ....6 Product Contents . -
Page 4: Important Safety Information
Please ensure you observe the safety instructions to avoid strangulation risk, accidents, injury and damage. Intended purpose • The Welcare Stay-Dry Bedwetting Alarm is for training a child out of bedwetting. DO NOT use for purposes other than bedwetting. It is not a therapeutic device. -
Page 5: Bedwetting Information
Important Safety Information - continued – DO NOT expose to temperatures over 60 ˚C. – DO NOT store or leave the product near sources of heat, in direct strong sunlight, in a high temperature location, in a pressurized container or in a microwave oven. -
Page 6: Features
• Sound & Vibration Mode • Vibration Only Mode Product Contents • Bedwetting Alarm • Adjustable Arm Band • USB Charging Cable • Progress Chart & Stickers • Instruction Manual & Warranty Information Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm... -
Page 7: Bedwetting Alarm Components
Bedwetting Alarm Components Front view: A. Alarm Body B. Adjustable Arm Band C. Alarm Speaker D. LED Light Indicator solid light = battery charging Blue solid light = battery charged “flashing” light = battery low Blue “flashing” light = alarm triggered by bedwetting E. -
Page 8: Before Using The Bedwetting Alarm
Insert the plastic hook into the small loop of the arm band. Adjust the tightness to ensure it fits snugly, but comfortably (not too tight). Pass the cord under the child’s pyjama top to avoid strangulation risk. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm... - Page 9 Using the Bedwetting Alarm - continued Open the sensor clip via the lever and attach it to the child’s underwear/ pyjama pants (where urine is most likely). Ensure the sensor clip is closed firmly on the fabric and that the cord does not hinder the child’s movement. At the first sign of moisture, the alarm will sound and/or vibrate to wake the child.
- Page 10 • A relapse is considered to be when the child wets the bed two or more nights consecutively. If relapse occurs, repeating alarm training will often produce a good response. • If bedwetting persists after 3 to 6 months of alarm training, alternative treatment options should be considered. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm...
-
Page 11: Charging The Bedwetting Alarm
Charging the Bedwetting Alarm • The product has an in-built rechargeable Lithium-ion battery. • When the battery power is low, the LED indicator will flash red. • When the battery power has run out completely the LED indicator will not light up and the alarm will not sound or vibrate. -
Page 12: Maintenance
• DO NOT store or leave the product near sources of heat, in direct strong sunlight, in a high temperature location, in a pressurized container or in a microwave oven. • DO NOT put heavy objects on the product. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm... -
Page 13: Troubleshooting
Troubleshooting Problem Possible Cause Solution Does not turn on. Battery has run out. Charge the battery with the USB charging cable. Alarm not Battery has run out. Charge the battery with the sounding. USB charging cable. Product is in OFF Turn the Mode switch to either Mode. - Page 14 If the problem is not solved by the troubleshooting guide or you have any queries, please contact our service centre: In Australia - 1800 807 464 In New Zealand - 0800 523 583 DO NOT attempt to open or repair the product yourself. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm...
-
Page 15: Warranty
AUS – www.jadavey.com.au NZ – www.jadavey.co.nz This Welcare Stay-Dry device is warranted to be free of manufacturing defects for 1 year from the date of purchase*. This warranty is void if the product is modified or altered is subject to misuse or abuse, damaged in transit or lack... - Page 16 Product instruction manuals can be downloaded online. • Contact Welcare Stay-Dry customer service. Our staff are trained to assist you with most issues you may have experienced, without the need to send your product in for service.
-
Page 17: Warranty Form
Warranty Form PLEASE RETAIN THIS WARRANTY CARD. RETURN THIS PORTION ONLY WHEN YOU RETURN YOUR PRODUCT FOR REPAIR UNDER WARRANTY. NAME: ADDRESS: POSTCODE: DAYTIME PHONE: EMAIL: MODEL: DATE OF PURCHASE: PLEASE ATTACH PROOF OF PURCHASE RETAILER’S NAME: RETAILER’S ADDRESS: POSTCODE: BRIEF DESCRIPTION OF PROBLEM YOU ARE EXPERIENCING: WARRANTY IS VOID UNLESS THE ABOVE INFORMATION IS COMPLETED AND CORRECT. - Page 18 Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm...
-
Page 19: Technical Data
Technical Data Product Name Welcare Stay-Dry Bedwetting Alarm Model Number WBA100 Power In-built Lithium-ion Rechargeable Battery (via USB) 5.0V DC 0.15A Operating Conditions Temperature: 0˚C to 40˚C Humidity: 45% to 80% RH (non-condensing) Storage/ Transport Temperature: -20 ˚C to 60˚C Conditions Humidity: 45% to 85% RH (non-condensing) Dimensions Approx. 60 x 50 x 10mm (alarm body) Weight Approx. -
Page 20: Disposal
Should you require any further information please do not hesitate to contact us. Disposal At the end of its life, please treat this product as electronic waste and dispose of responsibly according to current local regulations. Welcare Stay-Dry Children’s Upper Arm Bedwetting Alarm...
Need help?
Do you have a question about the WBA100 and is the answer not in the manual?
Questions and answers